| Total |
| Device type |
Access point for radio signals |
| Advanced construction |
Internal |
| Width |
24.13 cm |
| Depth |
24.13 cm |
| Height |
5.69 cm |
| Weight |
1.6 kg |
| Processor / Memory / Storage |
| RAM |
2 GB |
| Flash Memory |
1 GB |
| Network |
| Form Factor |
External |
| Connectivity Technology |
Wireless |
| Data Transfer Rate |
7.49 Gbps |
| Linear encoding format |
OFDMA |
| Data link protocol |
Ethernet, Fast Ethernet, Gigabit Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, 2.5 Gigabit Ethernet, Bluetooth 5.1 LE, IEEE 802.11ax (Wi-Fi 6E) |
| Spread spectrum method |
OFDMA |
| Remote Control Protocol |
HTTP |
| Cloud management |
Yes |
| Bandwidth |
2.4 GHz, 5 GHz, 6 GHz |
| Status indicators |
Status |
| Functions |
DFS support, WLAN controller mode, LLDP support, Maximum Ratio Combining (MRC), Universal Power over Ethernet (UPOE), Cyclic Shift Diversity (CSD), Beamforming Technology, Aggregation of A-MPDU Packets, Aggregation of A-MSDU packets, band management, dynamic frequency selection (DFS), secure charging, 2x2:2 MU-MIMO technology, 4x4:4 MU-MIMO technology, image signing, Cisco Trust Anchor module, BSS Coloring, compatible with Cisco Meraki, Target Wake Time (TWT) |
| Encryption algorithm |
AES, PEAP, WPA2-Enterprise, EAP-SIM, WPA3-Enterprise, WPA3-Personal, EAP-FAST, WPA3-Enhanced Open, WPA2-Personal, EAP-TLS, EAP-TTLS, MSCHAPv2, EAP-GTC, PEAPv1 |
| Authentication method |
MS-CHAP, MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST, EAP-SIM |
| Appropriate standards |
IEEE 802.3, IEEE 802.3ab, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11n, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.11ac, IEEE 802.3bt, IEEE 802.11ax, Wi-Fi CERTIFIED 6E |
| Aerial |
| Antenna |
Internal |
| Orientation |
Omni-directionality |
| Internet of Things (IoT) |
| Internet of Things (IoT) Compatible |
Yes |
| Communication technology |
Bluetooth Low Energy (LE) |
| Extension / Connectivity |
| Interfaces |
1 x 100/1/2.5GBase-T (UPOE) - RJ-45
1 x control - RJ-45
1 x USB 2.0 |
| Different |
| Appropriate standards |
FCC Part 15.247, AS/NZS 60950-1, RSS-102, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15.407, FCC CFR47 Part 15 C, FCC CFR47 Part 15 B, UL Class III, CNS13438:2006, RSS-247, AS/NZS 2772.2, CAN/CSA-C22.2 No. 60950-1, VCCI-CISPR 32:2016, RSP-100, RSS-GEN, EN 301 893 V2.1.1, AS/NZS 4268:2017, EN 300 328 V2.2.2, EN 50385:2017, 47 CFR Part 2.1091, QCVN 112:2017, Japan Std. 66, Japan Std. 71, EN 61000-3-3:2013 A1:2019, IEC 61000-3-2:2019, CAN/CSA-C22.2 No. 62368-1 Third Edition, UL 62368-1 Third Edition, EN 62368-1 Third Edition , IEC 62368-1 Third Edition, EN 301 489-17 V3.2.4 (2020-09), EN 301 489-1 V2.2.3 (2019-11), KS C 9832, EN 55032:2015 A11:2020, EN 62311 :2020, KS X 3124:2020, KS X 3126:2020, EN 61000-6-1:2019, Draft EN 303 687 V0.0.14, EN55035:2017 A11:2020, AS/NZS 62368-1 Third Edition, CISPR 32 :2015 AMD1:2019, AS/NZS CISPR32:2015 AMD1:2020, ICES-003, Issue 7, Class B, KS C 9835:2019, LP002 |
| Power supply |
| Power over Ethernet (PoE) supported |
UPOE |
| Software / System Requirements |
| Software included |
Meraki Dashboard |
| Operating system required |
Cisco IOS XE 17.9.1 or later |
| Manufacturer's warranty |
| Service and maintenance |
Limited Warranty - Advance Hardware Replacement - Lifetime - Response Time: 5 Days |
| Environmental parameters |
| Minimum operating temperature |
0 °C |
| Max Operating Temperature |
50 °C |
| Humidity Range Operating |
10 - 90% (non-condensing) |
