| Total |
| Device type |
Access point for radio signals |
| Advanced design |
Internal |
| Width |
20 cm |
| Depth |
20 cm |
| Height |
4.445 cm |
| Weight |
930 g |
| Processor / memory / storage memory |
| RAM |
2 GB |
| Flash Memory |
1 GB |
| Network |
| Form factor |
External |
| Connection technology |
Wireless |
| Data transfer speed |
3.9 Gbps |
| Linear encoding format |
OFDMA |
| Data link protocol |
Ethernet, Fast Ethernet, Gigabit Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, 2.5 Gigabit Ethernet, Bluetooth 5.1 LE, IEEE 802.11ax (Wi-Fi 6E) |
| Spread spectrum method |
OFDMA |
| Remote Control Protocol |
HTTP |
| Cloud management |
Yes |
| Bandwidth |
2.4 GHz, 5 GHz, 6 GHz |
| Status indicators |
Status |
| Functions |
WLAN Controller Mode, LLDP Support, Maximum Ratio Combining (MRC), Universal Power over Ethernet (UPOE), Cyclic Shift Diversity (CSD), Beamforming Technology, A-MPDU Packet Aggregation, A-Packet Aggregation -MSDU, band management, dynamic frequency selection (DFS), secure charging, 2x2:2 MU-MIMO technology, real-time network analysis, PowerSave, security slot (Kensington security lock compatible), high efficiency support (HE), Image Signing, Cisco Trust Anchor Module, BSS Coloring, Target Wake Time (TWT), Smart Capture, Tri-Band 2x2, CleanAir Pro Technology |
| Encryption algorithm |
AES, PEAP, WPA2-Enterprise, EAP-SIM, WPA3-Enterprise, WPA3-Personal, EAP-FAST, WPA3-Enhanced Open, WPA2-Personal, EAP-TLS, EAP-TTLS, MSCHAPv2, EAP-GTC, PEAPv1 |
| Authentication method |
MS-CHAP, MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-FAST, EAP-SIM |
| Appropriate standards |
IEEE 802.3, IEEE 802.11, IEEE 802.3ab, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11n, IEEE 802.1ab ( LLDP), IEEE 802.3at, IEEE 802.11ac, IEEE 802.3bt, IEEE 802.11ax, Wi-Fi CERTIFIED 6E |
| Aerial |
| Antenna |
Internal |
| Orientation |
Omni-directional |
| Gain level |
5 dBi |
| Internet of Things (IoT) |
| Internet of Things (IoT) Compatible |
Yes |
| Communication technology |
Bluetooth Low Energy (LE) |
| Extension / Connectivity |
| Interfaces |
1 x 100/1/2.5GBase-T (UPOE) - RJ-45
1 x control - RJ-45
1 x USB 2.0 |
| Different |
| Appropriate standards |
FCC Part 15.247, AS/NZS 60950-1, RSS-102, UL 2043, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15.407, FCC CFR47 Part 15 B, UL Class III, CNS13438:2006 , RSS-247, AS/NZS 2772.2, CAN/CSA-C22.2 No. 60950-1, VCCI-CISPR 32:2016, RSP-100, RSS-GEN, EN 301 893 V2.1.1, AS/NZS 4268:2017 , EN 300 328 V2.2.2, EN 50385:2017, 47 CFR part 2.1091, QCVN 112:2017, Japan Std. 66, Japan Std. 71, EN 55032:2015/A11:2020, EN 61000-3-3:2013 A1:2019, CAN/CSA-C22.2 No. 62368-1 Third Edition, UL 62368-1 Third Edition, EN 62368-1 Third Edition , IEC 62368-1 third edition, EN 301 489-17 V3.2.4 (2020-09), EN 301 489-1 V2.2.3 (2019-11), KS C 9832, EN 62311:2020, KS X 3124:2020 , KS X 3126:2020, EN 61000-6-1:2019, Draft EN 303 687 V0.0.14, AS/NZS 62368-1 third edition, CISPR 32:2015 AMD1:2019, AS/NZS CISPR32:2015 AMD1:2020 , ICES-003, Edition 7, Class B, KS C 9835:2019, LP002, EN 55035:2017 A11:2020, EN IEC 61000-3-2:2019 A1:2021, FCC CFR 47 Part 15, Class A |
| Pricing type |
Minimum order quantity of 10 units |
| Power supply |
| Power over Ethernet (PoE) supported |
UPOE |
| Software/System Requirements |
| Operating system required |
Cisco IOS XE 17.9.2, Cisco IOS XE 17.10.1 or later |
| Manufacturer's warranty |
| Service and maintenance |
Limited Warranty - Advance Hardware Replacement - Lifetime - Response Time: 5 Days |
| Environmental parameters |
| Minimum operating temperature |
0 °C |
| Max Operating Temperature |
50 °C |
| Humidity Range Operating |
10 - 90% (non-condensing) |
