Skip to content

Switch CISCO Catalyst 9300L 48-port PoE 4 x 1G uplink Network Essentials DNA subscription required

SKU KXG0058552

Избери период за изплащане и виж месечната вноска

Месечна вноска Обща сума за плащане ГПР Лихва Банка

Description

CISCO Catalyst 9300L 48-port PoE 4 x 1G uplink Network Essentials DNA subscription required
CISCO Catalyst 9300L 48-port PoE 4 x 1G uplink Network Essentials DNA subscription required
Manufacturer CISCO
Manufacturer part no C9300L-48P-4G-E
Marketing description
The Cisco Catalyst 9300 Series Switches are Cisco's leading stackable enterprise switching platform built for security, IoT, mobility and cloud. They are the next generation of the most widespread switching platform in the industry. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's flagship enterprise architecture. With speeds up to 480 Gbps, they are the industry's highest bandwidth stacking density solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first platform optimized for high-density Wi-Fi 6 and 802.11ac Wave2. It sets new maximum values ​​for network scale. These switches are also future-proof, with an x86 processor architecture and more memory, allowing them to host containers and run third-party applications and scripts natively within the switch.
The Catalyst 9300 Series is designed for Cisco StackWise technology, providing flexible deployment with Stateful Switchover (NSF/SSO) support for the most resilient architecture in a stacking solution (sub 50 ms). The highly resilient and efficient power architecture includes Cisco StackPower, which provides a high density of Cisco Universal Power over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture, which not only protects your investment, but also enables greater scale and higher throughput. The modern, programmable Cisco IOS XE operating system offers advanced security and Internet of Things (IoT) convergence capabilities.
Total
Device type Switch - 48 ports - L3 - stackable
Body type Rack mountable
Subtype Gigabit Ethernet
Ports 48 x 10/100/1000 (PoE) 4 x 1 Gigabit Ethernet SFP
Power over Ethernet (PoE) PoE
PoE Budget 505 W
Performance Switching capacity with stacking: 424 Gbps
Switching capacity: 104 Gbps
Forwarding speed: 77.38 Mpps
Forwarding rate with stacking: 315.48 Mpps
Capacity IPv4 routes: 32000
IPv6 routes: 16000
Multicast scale: 8000
QoS scale entries: 5120
ACL Scale Entries: 5120
Ports allocated: VLANs supported: 416
Supported VLANs: 4094
Switched Virtual Interfaces (SVI): 1000
MAC address table size 32000 records
Jumbo Frame Support 9198 bytes
Routing Protocol OSPF, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, PIM-SSM, Policy-Based Routing (PBR), RIPng, MSTP
Remote Control Protocol SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF
Functions Quality of Service (QoS), Cisco StackWise Technology, Rapid Per-VLAN Spanning Tree Plus (PVRST ), Shaped Round Robin (SRR), PXE Support, Remote Switch Port Analyzer (RSPAN), NetFlow, Energy Efficient Ethernet, Management Information Base (MIB), Class of Service (CoS), Flexible NetFlow (FNF), 802.1x authentication, 16MB packet buffer, DiffServ Code Point (DSCP) support, MACsec support, Control Plane Protection (CoPP), Switched Port Analyzer ( SPAN), Embedded Event Manager (EEM), Protocol Independent Multicast (PIM), First Hop Security (FHS), PVLAN support, Committed Information Rate (CIR)
Appropriate standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3bz
RAM 8 GB
Flash Memory 16 GB
Extension / Connectivity
Interfaces 48 x 1000Base-T RJ-45
4 x 1000Base-X SFP uplinks
Power
Charging device Internal power supply - hot-plug
Installed quantity 1
Maximum supported quantity 2
Power saving Optional
Delivered power 715 watts
Required voltage AC 120/230 V (50 - 60 Hz)
Different
MTBF 314,140 hours
Appropriate standards CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN 61000-6-1, AS/NZS 60950-1, CCC, ICES-003 Class A, UL 60950-1 , IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, CNS 13438, EN 55022 Class A, FCC CFR47 Part 15 B Class A, EN 300 386, KN32, KN35, EN 55032 Class A, CISPR 32 Class A, CAN/CSA-C22.2 No. 60950-1, TCVN 7189 Class A, V-3 Class A, TCVN 7317, CISPR 35
Dimensions and weight
Width 44.5 cm
Depth 4.4 cm
Height 40.9 cm
Weight 7.03 kg
Manufacturer's warranty
Service and maintenance Limited Warranty - Advance Part Replacement - Lifetime - Response Time: Next Business Day
Environmental parameters
Humidity sweep Working 5 - 90% (non-condensing)
Minimum storage temperature -40 °C
Maximum storage temperature 70 °C
Storage humidity range 5 - 90% (non-condensing)
Technical data provided by a third party. We assume no responsibility for errors in this data.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare