Bluetooth 5.0 aptX HD DAC SBC Ugreen Audio Receiver with 3.5mm Mini Headphone Jack - Black (CM402 80895)
Turn your wired headphones into wireless ! The Ugreen sound receiver, which wirelessly connects to smartphones or laptops , is equipped with a 3.5 mm mini jack connector. Thus, it will send the sound to the headphones or speakers, thanks to which you will get freedom and convenience . Almost no delays! The receiver supports as many as four sound transmission protocols - so you can be sure that the music quality will be at the highest level .
Definition:
- Brand: UGREEN
- Model: CM402
- Port: 3.5mm mini jack
- Battery charging connector type: USB Type C
- Bluetooth version: 5.0
- Audio transfer protocols: SBC, AAC, aptX, aptX HD
- Impedance: 16-600 ohms
- Frequency response: 20Hz - 20KHz
- Volume: up to 120 dB
- Range: up to 10 m
- Battery capacity: 400 mAh
- Music playback time: 10 hours
- Charging time: 2 hours
- Material: ABS PC
- The set includes: USB - USB Type C cable with a length of 0.5 m
- Dimensions: 1.5mm: 53 x 24 x 13.5mm
- Weight: 24.4g
- Black color
The most important advantages of the sound receiver Ugreen CM402:
-
You can wirelessly connect wired devices , e.g. headphones with phones, laptops or tablets with speakers - also those that do not have a 3.5 mm mini jack connector
-
Enjoy video game audio or music streaming with virtually no lag . The Bluetooth 5.0 module and built-in chips ensure sound transmission without loss or interference
-
Listen to music from the headphones without blocking the charging of the phone . The wireless connection gives access to a charging port, such as Lightning on the iPhone
-
Use the headphones for hours . The long-lasting battery allows you to listen to music for up to 10 hours
-
High-quality music at your fingertips - four Bluetooth codecs, including aptX HD, and chips, including DAC CS43131, ensure sound clarity
Turns wired headphones into wireless
The Ugreen sound receiver allows you to perfectly synchronize laptops, smartphones, tablets with multiple speakers and headphones , and thanks to the built-in microphone, it also has the function of headphones . It is a multifunctional device that will help you in many life situations:
-
allows you to listen to high-quality music on headphones while traveling - without cables tangled in your pocket.
-
will allow you to answer the phone wirelessly while driving - when your car doesn't have Bluetooth but has a 3.5mm mini jack input.
-
will make it possible to charge the phone and listen to music on headphones at the same time - especially on those smartphones where one port shares both these functions, for example Lightning on the iPhone.
Quality you will hear
The audio receiver will allow you to stream music in really high quality . It supports four Bluetooth codecs, including aptX HD Qualcomm and aptX LL . So it synchronizes the sound with the picture with almost no delay. The manufacturer declares that the shift will be up to 40 ms - this difference is practically imperceptible to the eye and ear. Ugreen has also made sure that the sound is reliably clear - no matter what headphones you have. The amplifier supports impedance from 16 to 600 ohms . So it adapts to many headphone models.
The battery for a long time
However, don't worry about the battery draining quickly. The device has two chips with extremely low energy consumption : DAC CS43131 (with SNR at the level of 120 dB) and Qualcomm QCC3034 for the Bluetooth 5.0 module. They are designed specifically for stereo headphones . So you can listen to your favorite music loudly for up to 10 hours without draining your battery! Interestingly, charging the receiver will only take 2 hours .
Don't have a 3.5mm mini jack connector? No problem!
Want to connect a speaker or headphones to a laptop that doesn't have a 3.5mm mini jack? The Ugreen receiver comes to the rescue - it can be turned into an external, independent sound card at any time . The USB Type C connector supports audio transfer on computers running Windows 7, 8 and 10, macOS and Linux .
Quick pairing with NFC
If your phone has the NFT function, the Ugreen receiver will connect to it in a few seconds. Due to the built-in NFT feature, you can pair your device with one click . It is important to note that the receiver can connect to two devices at the same time and freely switch between them.
Support for four audio protocols
To ensure the highest possible sound quality, the Ugreen receiver is equipped with four Bluetooth codecs . Thanks to the smart chip, the device will inform you what audio transmission protocol has been detected. Pay attention to the LED light:
- blue light - SBC protocol
- green light - AAC protocol
- yellow light - aptX protocol
- purple light - aptX HD protocol
Three buttons, many functions
Phone calls, listening to music, switching between songs ... All possible functions provided by the CM402 receiver can be controlled with just three buttons . These are:
- play / pause - turns on and stops sound transmission (short press), turns the device on and off (press for 3 seconds), accepts and ends a phone call (short press), rejects the call (press for 3 seconds)
- volume ( ) - increase volume (short press), previous song (long press)
- volume (-) - volume down (short press), next song (long press)
CTIA and OMTP plug-in support
The CM402 receiver is compatible with two standard 3.5 mm mini jack plugs: CTIA and OMTP . So you won't have any compatibility issues between the hardware. The difference between the older OMTP cable and the newer CTIA cable is minor: the ground and microphone pins are swapped, which can cause audio recording problems if you're using incompatible standards. The Ugreen adapter completely solves this problem!
Features:
- Brand: Ugreen
- Connector type : 3.5mm mini jack (female)
- EAN : 6957303888955
- Main color : Black
- Type of packaging : Box
- Manufacturer code : CM402 80895
- Manufacturer code : 6957303888955
- Product packaging thickness in CM : 2.5
- Product packaging height in CM : 10.95
- Product packaging width in CM : 8.15
- Code : 6957303888955
